It can be used 500,000 different ways (or I'm convinced it can be as I seem to imagine up a new one every week). Easy to use, easy to carry.4,950 lb. ”This unique hitch-tending pulley from ISC Is the perfect match for your Rope Wrench and works great in MRS as well! Contains hitch-tending pulley, double-locking carabiners, and 9mm prusik cord for tying a friction hitch like the French Prusik or Distel on a wide range of ropes.
”The Hitch Climber pulley is popular for organizing a hitch system, thanks to the 3 holes which streamline the system, and open up additional tie-in options for advanced uses. Holds well on wet ropes and brand new ropes as well. Buy Now Notch Equipment. This kit packages the Eccentric with 9mm Bail Out XL prusik (30) and two DMM UltraO carabiners which gives you a flexible setup that will work well on a wide range of ropes, and saves you a few bucks!“(Hitch Climber Pulley Set) I love it, used for about 6 months as a positioning system and for rappel, it never lets me down.
The Phlotich pulley from ISC is the perfect mate for your Rope Wrench and also can be the heart of a MRS system. If you've used other pulleys and thought, "I wish this edge was curved," on the hitch climber, it's curved. Your kit will contain: CMI Micro Pulley (PUL101) 9mm Bail Out XL Prusik (CLI369) 2 x RockO Carabiners (CAR136) This kit packages the Phlotich with 9mm Bail Out XL prusik (30") and two ISC Offset Oval carabiners which gives you a flexible setup that will work well on a wide range of ropes, and saves you a few bucks!Match up the prusik diameter with your climbing line: 5/16" prusiks will work with 7/16" ropes, 3/8" for 1/2", and 9mm prusiks will work with either.This redesign of the classic Hitch Climber advances your friction hitch earlier and fairleads your rope better for greater efficiency. This strong, compact pulley weighs only 3 oz (90 g). We're sure you'll find many other uses for this great new pulley.The Hydra can be loaded at any of the three rubber-lined carabiner holes on the swivel top, and has a maximum rope diameter of 1/2” (13mm), breaking strength of 28kN (6294 lb), and a WLL of (5kN 1124 lb).7,000 lb breaking strength, 1/2” capacity, 2.75” tall x 1.85” wide, weighs 2.4oz.“The way your friction hitch and climbing line connect to the pulley allows the tension in your climbing line to straight line the pulley and keep it from flopping all over the place.
Buy Now CMI.
For friction hitch work positioning systems, whether with moving or stationary rope, it is the epitome of refinement.44 kN MBS, 8 kN WLL. It can be used for slack-tending and generating mechanical advantage for rescue and gear hauling, not to mention improving work-positioning systems. The fit and finish are excellent, the pulley runs smooth, the edges are all rounded, and there is very little free play when you open the pulley to install it on your climb line.“It's a little pricey for a micro pulley, but there are good reasons for that.
The side plates boast increased fairleads and tuned angles for more efficient prusik minding.7,000 lb breaking strength, max capacity 1/2”, 2.75” tall x 2.75” wide, weighs 3.2 oz.This spacer is designed to be used with the DMM Pinto Rig Pulley to keep the side plates from pinching together when using textile products.Ideal for arborist rigging where two independent tie-ins are required.
28mm sheave. A pulley with multiple anchor holes like the Hitch Climber can also neaten up your climbing system and make it more compact, or open up uses for hauling and mechanical advantage.
1 1/4” aluminum sheave.Incredibly high strength in this compact and sleek micro pulley.
Rounded anchor holes work great with custom spliced terminations or carabiners. Using a pulley to tend your hitch frees you up for one-handed slack-tending.
Using pulleys throughout your climbing system can help reduce overall friction and improve the efficiency of your climbing.“My first pulley, initially used for 'hitch tending' a Blake's hitch; always on my belt for use when needed.
Slack Tending Pulley Kit from GM CLIMBING, which contains: 1x 30in 8mm Friction Hitch VT Prusik, 1x 25kN Oval Twist Locking Carabiner, 1x Micro Pulley(according to your choice).
breaking strength, 1/2” capacity, 2.85” tall by 1.75” wide, weighs 2oz.A high-quality pulley is the heart of a good doubled-rope climbing system. The Hitch Climber is the most popular pulley for this purpose, but WesSpur also has the popular CMI, SMC, and Petzl pulleys used by many. My recommendation: Buy two of them. High-quality, fixed-sided aluminum pulley with 1/2” (13mm) maximum rope capacity and 6,294 (28 kN) MBS.
Because climbing line tension holds the hitch climber in position the friction hitch gets sucked into the hitch climber all on its own as you advance. Available in three sizes. Should only be used with spliced-eye climbing lines.This little purple guy is one of our best-selling Micro pulleys.