Create memories that matter through fishingSo don’t ever let a knot, twist, or loop in your spinning reel line be the cause of your lost fish.All because you didn’t know how to spool braided line on a spinning reel correctly.I won’t bore you with every single step on here, as the video (below) does a phenomenal job of showing you exactly how to spool braided line on a spinning reel.I’ve often just reversed the braid on the reel, providing me with a “new” line to be casting. Wet the knot and cinch it tight. The key here is to make sure you are putting enough pressure on the line as it comes off spool.
The fish were cracking the jig on the fall and I was catching my share when I went to set the hook and it felt like my spool lurched forward. Use your index and thumb finger to put rigidity on the line. Using a double uni-knot to attach the single strand fishing line to the braid.
Start with the reel. Do you see any problems with this?You even have a brand new spinning reel that has only been cast five times, you just put brand new line one, you have the drag set perfectly, and even your mono leader is brand spanking new.Tight lines >—- ( * > Salt StrongYour “go to” redfish-slaying assassin of an artificial jig ready is to cast, and you are ready to land a monster red.In December of 2014, these two brothers shocked their clients, friends, and family by quitting their 6-figure jobs to start their dream focused on helping saltwater anglers:But I will give you a handful of pointers that have served us well.Learning how to properly spool a braided line on a spinning reel without line twists, loops, or knots should help you avoid that variable going forward.But you look around for the pod of redfish, and they are nowhere to be found.And you have just the perfect bait for them.But controlling your spinning reel line doesn’t have to be one of them.You are about to break in that brand new spinning reel with a HUGE redfish.PS: Real Magic… Love that $tuff!You flip the bail to cast to the perfect spot a few yards away from the school of fish, and all of a sudden you notice that your brand new line has a loopy line twist.Do what the “SMART ANGLERS” are doing and join the Insider Club.You frantically try to straighten out the line and fix the twists, and after a couple of minutes of working your fishing line magic, the line appears to be straight.From what you can see with your polarized glasses, the school appears to have at least 15 over slot monster redfish all looking for some food.Just imagine spotting a huge school of redfish just 30 feet from the bow of the boat that you are standing on.There are countless ways to lose or miss a fish.1.
Some of the knots they use is the single Uni-knot, Reverse Cinch knot / San Diego Jam, are a few mentioned. Once securely on the arbor of the spool, the braid will dig into the tape holding it securely in place. The knot, as well as way you secure it, is extremely important to your success with braid.Uni to Uni connection for mono to braid.Things to think about regarding the braid connections to spool, and mono to Braid:The third way that had been mentioned was a direct knot to a clean arbor.
If you give up pressure for even a second, it could result in your line not sticking to the spool the way you want it to Always remember to … Mono is cheaper than braid and this works very good when trying to get your braid to the top of the spool for maximum performance. First thing we get a piece of tape. This is after I spool the way the video shows.You are already envisioning your friend’s jealous face as they scroll through their Instagram feed and see you holding your monster red.And most of the variables that cause you to lose a fish are mostly out of your control.Here’s what you’ll receive today when you join:Save 30% And Put An End To Your Monthly Charges.2. Guys will take off 2/3 to 3/4 the spool then make the connection between the mono and braid then fill the spool. Reels that held 350 yards of 30 lb mono will hold double the line of braid and most of the time it is not necessary to have that much line on the reel. Doesn’t matter what reel, if moisture is held within the line, or retained in the tape, the opportunity for corrosion to start is there.
If its too loose in the spool and your fighting a big fish if you crank the drag all the way down the line can get pulled into a loose spool and get weird. The piece of mono can be rather short, 12 to 16″ or a few yards long, whatever the angler feels more comfortable with. Wrap the tag end of the same strand through the loop 10 times, making sure to wrap around the strand of the other line as well. In the store on a line machine you will hear the line tinging which might be a little tight but having it tighter than looser is important.Recently I was on a fishing trip here in southern California out of Long Beach on the sportfishing boat “Tornado” in a wide open rock fish bite. Finger tape, Masking Tape, or 25 lb mono(Last week we did a video on this and we received a good amount of responses from the general public and these were the more popular responses)The First way that many dealers and anglers use to secure braid on the spool is tape. Alcohol towelettes or a rag will do the job.